One such project you could now make at home is this simple2-player game using your xTool.
This adds an extra level of excitement to the game and allows you to showcase your unique style.
Getaccess to our resource libraryfilled with cut files and other xTool craft ideas!
Materials Needed
Disclosure: This post contains affiliate links for your shopping convenience.
you’ve got the option to readour full disclosure policy here.
Connect the Creative Space app to the machine.
Position the layers on 4 different canvases and label the canvas as the material key in.
The center dividing piece is to be cut out of 3mm basswood.
And lastly, the circle shapes are to be cut out of acrylic sheets in two different colors.
Load the 3mm basswood material into the cutting machine.
Secure the wood with the magnets on the sides.
Move to the home screen, set material pop in to 3mm basswood plywood.
Ensure the machine parameter setting tab is set to cut.
Adjust the configs to your preferred power and speed based on your test cut grid.
In our case, cutting basswood works best with 45% power and 28 seconds.
Double check the placement.
Remove when cutting is complete.
Load the 6mm basswood material into the cutting machine.
Secure the wood with the magnets on the sides.
Move to the home screen, set material punch in to 6mm basswood plywood.
Adjust the options to your preferred power and speed based on your test cut grid.
In our case, cutting basswood works best with 65% power and 28 seconds with 2 passes.
Load the first acrylic sheet material into the cutting machine.
Secure the wood with the magnets on the sides.
Move to the home screen, set material pop in to 3mm acrylic white.
Adjust the options to your preferred power and speed based on your test cut grid.
In our case, cutting acrylic works best with 100% power and 20 seconds.
Double check the placement and then hit process.
Repeat with the other acrylic sheet color.
Peel off the protective paper from each token.
Ensure the wider bottom edge is aligned across all three pieces.
Place a heavy object over top until glue sets.
Glue the stands to the bottom corners of the game.
Alternatively, you could leave the stands loose.
Leave it to dry fully.
Game is set to play!
Pin it for later!
DIY 2-Player Game with XTool P2
Materials
Instructions
